除鐵機檢修注意事項：

Considerations for maintenance of iron removing machine:

1. 在永磁除鐵機控制柜上給設備停電，并在操作按鈕上掛“有人工作禁止合閘”的停電告示牌。

1 in the permanent magnet iron removing machine control cabinet for power equipment, and on the operation button hanging on "people work f no switching power outage signs.

2. 檢修前首先要通知調度室，待帶式輸送機物料運行停車后，方可進行設備的檢修工作。

2 before the overhaul, we must first inform the dispatch room, after the belt conveyor is running, the equipment can be repaired.

3. 待帶式輸送機停下后，將帶式輸送機頭操作箱“就地”、“集空”主令開關打到“停車”位置，并掛“停車牌”，以防不知情人士開機運作，危及維修人員人身安全。

3 to stop the belt conveyor, the belt conveyor head operation box "in place", "empty" master switch to "stop" position and hang "parking card", to prevent insider boot operation, endanger the personal safety of maintenance personnel.

4. 將除鐵機上落下的鐵器全部清理干凈，恢復除鐵器送電，摘除機頭操作箱“停電牌”將主令開關打到“集控”就地力位置通知調度恢復生產。

4 in addition to iron falling iron all clean, restore the separator power supply, removal of head box "Blackout" brand will be the master switch to "control" is shown productivity position notice to resume production scheduling.